Category: Group Blog

9 attended the June Skype meeting.

Lee Allen told us about progress on his planned layout and there was some discussion about using copper clad sleepers at base boards joints.

Tim Williams showed us the latest additions to Chwarel Cwm Bach 2.0, including a transporter incline with a pair of transporters and some track that had been 3d printed. There was also some discussion about how wagons were put on and taken off the various types of inlines.

Ben Powell showed us progress on his Ironstone layout, including an engine shed based on an example on the Stewart & Lloyds system and scenic work on the tipping dock.

Steve Metcalfe showed us progress on his Bowaters layout, including finished track work on the Kemsley incinerator loop module and plans for the other modules that make up the layout.

Mac Strong revealed plans for some more Frem009 modules that include a turntable and engine shed.

Julien Webb showed a scratch-build project (another from the ex-demo pile) of an Andrew Barclay 0-4-0T built for Fiji built on a Minitrains F&C chassis along with a selection of 009 Society kits going through the paint shops.

David Churchill had been continuing work on his two C50 locos, including detailing as it would seem from David’s research that no two of the 200 locos built were the same! There was some discussion as to how the headlights might be made – each loco needing 6 of them! – but nobody could better David’s suggestion of starting with a EM gauge pin point bearing.

9 managed to attend the May virtual meeting (or virtual May meeting?) via the wonders of the Internet.

 

David Churchill showed us a pair of C50 Hungarian 4 wheel diesel locomotives built using some special order HO scale 3D printed bodies by James Hilton (based on his OO scale prints) running on Tomix TR-02 chassis that have been cut down to fit.

David had also progressed with the new Minitrains tram loco with the Tramfabriek conversion so the etched brass plates had been fitted along with some lining and it was awaiting a final coat of varnish.

Blair Hobson showed us around his new HOe Layout “Ostrovia” (https://www.youtube.com/watch?v=41e9UzLHjNM), where scenic work is progressing well, along with a selection of stock that included a pair of Posch Modell HOe C50s to compare with David’s and a blue MAV coach from the same source.

Mac Strong showed us progress on his 2 009 layout modules. These were seen at the February Moorfield meeting, but now one – a scene with the line crossing a small river – is largely finished and the other – a small station halt – is progressing well. Mac also discussed issues he has had with the Kato Portram chassis of his latest kit built loco, a Narrow Planet Alan Keef K12.

Tim Williams had been busy with his 3D printer, having made a new winding house for the slate quarry diorama (due for display at the Bala Lake Railway’s museum) along with a selection of ‘bar’ section rail. He also discussed a possible alternative power source for the HOf layout ‘Insulation Lumber’ seen last month in the form of a Wilsco D20 stationary steam plant linked to a dynamo.

Steve Metcalfe announced that the Grainge & Hodder baseboards for his planned industrial layout based on the Bowater’s (Sittingbourne & Kemsley) system and showed us the first buildings, including an incinerator plant, made from American HO kits left over from his earlier modelling career.

Ben Powell showed us progress on his new layout, an Ironstone system’s narrow and standard gauge interchange, that will include a Corgi face shovel that he had repainted from its LMS livery and weathered, along with a selection of narrow & standard gauge Pecketts.

Julien Webb had been digging about in his lost projects box and had come up with some South African Railway’s 2′ gauge stock as a change from the brace of Gamecocks he had been working on. The wagons – a B class from a Worsley Works kits and a pair of DZ wagons from the Boston Largs kit – had been sprayed in a red oxide livery and the V-16 class guard’s van (Worsley) had been fitted out with full interior details (thanks to a set of plans from Will King) and was slowly progressing through the paint shops. Julien had also been keeping his kit stash restocked with the purchase of a pair of the new Narrow Planet Baguley McEwan Pratt ‘677’ 10HP Class 0-4-0PM kits and the requisite Tsugawa TGW TU-DB158 chassis from Japan and 12v motors from Tramfabriek.

West Midlands Narrow Gauge Group virtual report, 13th April

Thanks to the IT knowhow of Tim Williams 9 of us were able to take part in an on-line meeting, a week after a trial run on our scheduled meeting night (April 6th) ironed out a few bugs.

Tim showed us progress on his latest project, a HOf logging line on a 1m by 45 cm piece of foam insulation board, including some log carrying bolster he had 3D printed at home (including the 6.5mm gauge wheel sets) and some pointwork bases at considerably less cost than the Busch versions. Tim had also been using his 3D printer to make some bespoke tracksettas for Lee Allen for 6″ and 9″ curves to help Lee with track laying on his planned new 6′ by 2′ layout “Mawddach Sheds”.

Blair Hobson was able to join us briefly until his phone’s battery ran down and showed us progress on his new HOe layout “The Kingdom of Ostrovia” and his latest acquisition of a 3D printed Resita locomotive body on an 0-8-0 chassis built by Ben Powell using a Farish 08 with RT Models parts to add a 4th axle and working valve gear.

Julien Webb eventually managed to get a working connection and was able to talk about his current workbench projects rather than just listen to everyone else! These include some figures for his Nechelles Government Railway directors saloon (that’s only been waiting since 2005 for passengers after being built from an Eisteddfod coach for a Chairman’s Challenge), a brace of SRB ‘Gamecock’ chassis that have been progressing very slowly as demonstration stand fodder, a pair of RT Models ‘Chattenden’ diesels (one from the late Pete Smith’s collection) that need finishing and the chassis for the next build. As a change for ‘old’ stuff he also showed a chassis that Ben Powell kindly built from a Farish 08, Robex printed cranks and RT models valve gear for a Dundas SLGR 85 / W&LLR 14 white metal loco kit.

David Churchill had also been busy, having wired up a small pizza test track that allowed us to see his latest model running. This was one of the new Minitrains tram locos which David had enhanced with the even newer detailing kit from Tramfabrik that includes brass nameplates, coupling rods and other enhancements.

The plan is to try to continue with some form of monthly online meeting during the current crisis, and these will probably be taking place on the ‘usual’ meeting nights.

Julien Webb Writes:

Whilst the regular monthly meetings of the West Midlands Narrow Gauge Group are on hold, as are all the events (both full-size and model railway), due to the ongoing Coronavirus outbreak we thought we might try blogging about what group members are up to with all the free time we find ourselves with.

So, for our first post welcome to my workbench – and yes, it is tidier than usual! 

So far I’ve been trying to catch up on some things that need finishing and one of these is the Nechelles Government Railway (my “freelance colonial 2′ 6″ gauge railway” that I’ve yet to build…) that was converted from a Dundas Eisteddfod coach kit for one of the 009 Society’s Chairman’s Challenge AGM competitions a number of years ago. Whilst well detailed inside it lacked any VIPs so I’ve spent the past few days painting and fitting some…

These have come from the Monty’s Models range from Dart Castings (no connection other than a satisfied customer), and I’m also working on a Steward figure (converted from a ‘Station Staff’ figure by carving off his hat) to go into the galley kitchen.